Eizo 620L - Manual (Page 55)

(Web Connection)
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WBT]
"SetupWizardEnabled"=dword:0 ...................... Specifies whether starting up
“eClient Setup Wizard” or not. (0;
not starting up, 1; starting up)
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WBT\Clients\ Registration\Web\Connections\Web1]
"StartCmdLineArgs"="URL" .......................... Specifies the URL (including
http://) to access.
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WBT\Shell]
"EnableAutoConnect"=dword:1 ....................... Specifies whether to enable/disable
automatic connection. (0;disable,
1;enable)
"ConnectionDefaultKey"="ConnectionName" ........... Specify connection information name
of the automatic connection.
"ConnectionDefaultType"="RDP" ..................... Specify the type of the automatic
connection. (The type is RDP, ICA,
or Web.)
* 1 One entry name can be set at the Administration Console function.
eClient 620L Settings
The eClient 620L’s default setting is set to enable DHCP Options. There is no need for
extra settings. After initial setup, confirm the following:
• How to obtain an IP address
- Confirm the [Obtain an IP address via DHCP] is selected.
• [DHCP Options] tab of [DHCP Settings] in the [Control Panel] tab
- Confirm the [Enable DHCP Options] is selected and all option number is set.
NOTE
• If the DHCP Option is used to setup the eClient 620L for the first time,
“Terminal Connection Manager” will appear because the unit automatically
receives information from the DHCP Server. (“eClient Setup Wizard will not be
displayed.)
• If the DHCP Option is set once and needs to be canceled, please change the
key of the DHCP Server. Even if changing the DHCP Option in the eClient
620L, the DHCP Server will overwrite the option next time the unit is restarted,
and the changes in the eClient 620L will not be effective.
8. PRACTICAL SETUP
55