Eizo 620L - Manual (Page 9)

2. CONNECTING THE eClient
620L
This chapter explains how to connect the eClient 620L to a WTS.
2-1. Setting up the eClient 620L
NOTE
• Before connecting the product, set up the monitor after
unfolding the base of the stand.
WARNING
Place the eClient 620L on a strong, stable surface.
A unit placed on an inadequate surface may fall, resulting in injury
or equipment damage. If the unit falls, disconnect the power
immediately and have the unit checked by a qualified service
engineer before using it again. Using a unit after it has been
dropped may result in fire or electric shock.
OK
Set the unit in an appropriate location.
Not doing so may result in fire, electric shock, or equipment
damage.
*
Do not place outdoors.
*
Do not place in the transportation system (ship, aircraft, trains,
automobiles, etc.)
*
Do not place in a dusty or humid environment.
*
Do not place in a location where the steam comes directly on the
screen.
*
Do not place near heat generating devices or a humidifier.
2. CONNECTING THE eClient 620L
9