New Transducers 42PF9830/10 - Manual (Page 18)

18
Smart colour modes:
• Personal : Select any colour or hue to match to
your personal taste, e.g. your interior, the
programme content (sports, movie, etc.), the
mood you are in, etc.
• Warm white :The colour is matched to that of
most normal lightbulbs. Select this setting if you
want the Ambilight to fit best with normal living
room lighting.
• Cool white :The colour is matched to that of
normal daylight (6500K). Select this setting if
you prefer more cool lighting.
Note: the 6500 K is the SMPTE recommended
setting for ambient backlighting of displays.
• Blue :The blue colour is preferred by most
consumers to create a cool, modern and /or
mystical atmosphere. Select this setting
according to your personal taste or mood.
Ambilight menu
Ambilight is an innovative lighting concept using light with fully adjustable
colours at the back of the TV to enhance the viewing experience. Analysis of
the picture content adapts the colours continuously, or the lights can be set to
any fixed colour and many shades of white. Ambilight creates the ideal viewing
environment for your TV resulting in improved relaxed viewing, improved
perceived picture detail, contrast and colour.
In standby mode the lights can be set/operated to any colour and create a
unique ambiance in the room.
& Select Ambilight in the TV menu.
é Press the cursor right to enter the Ambilight menu.
“ Select Ambilight and press the cursor right to select Off or On .
• Off : will switch off the ambient lights and downlight all other ambilight
menu items.
• On : the ambient lights will be on. Refine the light settings in the menus
below.
‘ Select Brightness to adjust the light output of the ambient lights.
( Select Mode and press the cursor right to select Colour , Ambience ,
Relaxed , Movie or Action .
• Colour : this will show constant light according to the settings in the
Ambilight colour menu. See below.
• The options Ambience , Relaxed , Movie and Action will dynamically
match brightness and colour to the screen content.
The mode selection made will effect the speed and/or saturation and/or
intensity which determines the viewing impression.
E.g. in
Relaxed mode, the rate of brightness and colour change is
smoothly and soft which gives you a more immersive yet relaxed viewing.
Ambience is the rate of brightness and colour change as predefined in
the factory.
Movie will influence the perception of a movie whereas Action mode will
influence the dynamic impression.
Notes:
- The rate of change is limited, as not to cause uncomfortable sensations.
- According to the selection made, some Ambilight menu items will be downlighted
and can not be selected.
§ In case Colour has been selected in the Mode menu:
• Select Colour in the Ambilight menu and press the cursor right.
• Select Smart colour and then select Personal , Warm white , Cool
white or Blue .
• Select Palette to select the general colour of the light output.
• Select Saturation to adjust the colourfulness of the light.
Notes:
- Adjusting the Palette and/or Saturation settings will set the colour mode to
Personal.
- The selected colour mode will be the one used when turning on the ambient
lights from standby mode.
è In case Ambience , Relaxed , Movie or Action has been selected in the
Mode menu:
• Select
Separation in the Ambilight menu and press the cursor right.
• Select Off for a mono behaviour which means that all lamps will behave
equally.
• Select Minimum , Medium or Maximum to define the Ambilight stereo
effect over the available lamps.
! Select Balance and use the cursor left/right to adjust and generate any
colour and level of light intensity on the left and right side of the picture to
perfectly match your room setup.
Ambilight in Standby mode
When the TV is switched off, the ambient lights will also be switched off.
When the TV is in standby mode, ambilight can be used to provide a unique
ambience for the room. Press the
AMBILIGHT ON/OFF key on the
remote control (see p. 4) to switch between Ambilight Off or On.
Note: Infrared interference
To avoid bad infrared remote control reception, place your peripheral
equipments out of sight of the ambient lights of your TV.
Note: Ambilight does not function well when the room temperature is less than
59°F/15°C.
Settings
TV
Picture
Sound
Ambilight
Features
Ambilight
Ambilight
Brightness
Mode
Colour
Separation
Balance
Info
Settings
Ambilight
Ambilight
Brightness
Mode
Colour
Separation
Balance
Mode
Colour
Ambience
Relaxed
Movie
Action
Info
Settings
Ambilight
Ambilight
Brightness
Mode
Colour
Separation
Balance
Colour
Smart colour
Palette
Saturation
Info