New Transducers 42PF9830/10 - Manual (Page 26)

26
& Connect the three separate component video cables 1 to the peripheral equipment having component video outputs (YPbPr), such
as DVD-players, laser-disc players, videogame players, satellite receivers or other equipment, and to the
Y , Pb and Pr jacks of EXT4
on the TV.
Note:
EXT4 should always be used together with digital audio.
é Connect the audio cable 2 to the DIGITAL AUDIO OUT of the peripheral equipment and to one of the DIGITAL AUDIO IN
connectors of the TV.
Notes
- If necessary, you can adjust the picture position to the centre of the screen with the cursor keys.
- The labels for the component video sockets may differ depending on the DVD player or the peripheral equipment connected. Although the
abbreviations may vary, the letters B and R stand for the blue and red component signals, respectively, and Y indicates the luminance signal. Refer
to the DVD player’s or peripheral equipment instructions for use for definitions and connection details.
- This television is designed to accept high definition signal standards 480p, 576p, 720p and 1080i as specified by the Electronic Industries
Association standard EIA770.3.
Digital peripheral equipments from different manufacturers have the possibility of differing output standards which may cause difficulties for the
television to properly display.
Warning : in case you notice scrolling images, wrong colours or no colour, no picture, or even combinations of these on your screen, check if the
connections are done in the correct way or move your digital equipment further away from your TV.
L
R
EXT 1 EXT 2 EXT 3 OUT
AUDIO ANTENNA
75 DVI HDMI L
R
NETWORK
DIGITAL AUDIO
IN2 IN1
Pr Pb Y
OUT
AUDIO
DIGITAL EXT 4
YPbPr
IN 1/2
AUDIO
....
....
1 2
Equipment with Component Video Output Connectors (YPbPr)
DVD Player or other peripheral digital source equipment