New Transducers 42PF9830/10 - Manual (Page 8)

8
It is possible that the cable company or the TV channel
displays a broadcast selection menu. Layout and items are
defined by the cable company or the TV channel. Make
your choice with the cursor and press the
OK key.
Searching for and storing TV channels is done channel by
channel.
You must go through every step of the Manual
Installation menu.
Store TV channels
After language and country are set correctly, you can now search for and store
the TV channels in two different ways: using Automatic Installation or Manual
Installation (tuning-in channel by channel, see further).
Automatic installation
& Select Automatic installation in the Installation menu.
Note: All channels must be unlocked in order to autoprogram. If requested, enter
your code to unlock all channels. (See TV, Features menu, Childlock, p. 17.)
é Press the cursor right to enter the Automatic installation.
The autoprogramming option label
Start now appears.
“ Press the OK key.
‘ Press the green key Start to start autoprogramming.
The menu screen disappears and the progress of autoprogramming is
displayed.
If a cable system or a TV channel which broadcasts ACI (Automatic Channel
Installation) is detected, a programme list appears.Without ACI broadcast,
the channels are numbered according your language and country selection.
You can use Reshuffle to renumber them. See p. 9.
Manual installation
& Select Manual installation in the Installation menu.
é Use the cursor right to enter the Manual installation menu.
“ Select Selection mode .
Select either the frequency band, the C-channel option for aerial channels
or the S-channel option for cable channels.
‘ Press the cursor down to select System .
Select your country or part of the world where you are now located.
( Press the cursor down to select Channel.
Enter or select the number where you would like to store the TV channel.
§ Press the cursor down to select Search .
The frequency or the C- or S-channel number increases until the TV
channel is found.
Note: If you know the frequency, the C- or S-channel number, enter the 3 or 2
digits of the frequency or the channel number directly with the digit keys 0 to 9
(e.g. 048).
è Press the cursor down to select Fine tune .
Adjust the frequency with the cursor up/down in case of poor reception of
the channel found.
! Press the cursor down to select Store.
Press the cursor right and store the channel found with the OK key.
Repeat steps ( to ! to search for another TV channel.
Select the menu language and country
& Press the MENU key on the remote control.
é Use the cursor down to select Installation in the Settings menu.
“ Use the cursor right to enter the Installation menu.
‘ Select Language and enter the list of available languages with the cursor
right.
( Select your language with cursor up/down and press the OK key to confirm
your selection.
§ Select Country with the cursor up/down and enter the list with the cursor
right.
Select the country where you are now located and press the
OK key.
è Proceed with the Installation menu.
Installation
Settings
TV
Setup
Installation
Demo
Exit
Installation
Language
Country
Automatic installation
Manual installation
Reshuffle/Rename channels
Preferred channels
Manual network installation
Software upgrade
Info
OK
œ
π
Installation
Manual installation
Selection mode
System
Channel
Search
Fine tune
Store
Info
Settings
Installation
Language
Country
Automatic installation
Manual installation
Reshuffle/Rename chan
Preferred channels
Manual network installation
Software upgrade