Neuton CE 6.2 - Manual (Page 39)

NEUTON CE 6.2 Battery-Powered Mower - Safety & Operating Instructions 35
Chapter 7: Servicing and Storing Your NEUTON Mower
This chapter explains how to clean your Mower; change, sharpen, and balance the Blade; and store
your Mower for long term.
Servicing Your Mower
•
NEVER MAKE ADJUSTMENTS OR REPAIRS WITH THE MOTOR RUNNING. ALWAYS STOP THE MOTOR,
WAIT FOR THE BLADE TO STOP MOVING, REMOVE THE SAFETY KEY AND REMOVE THE BATTERY TO
PREVENT ACCIDENTAL STARTING.
• NEVER TAMPER WITH SAFETY DEVICES. CHECK THEIR PROPER OPERATION REGULARLY.
•
NEVER ATTEMPT TO MAKE WHEEL-HEIGHT ADJUSTMENTS WHILE THE MOTOR IS RUNNING.
•
GRASS CATCHER COMPONENTS ARE SUBJECT TO WEAR, DAMAGE, AND DETERIORATION, WHICH
COULD EXPOSE MOVING PARTS OR ALLOW OBJECTS TO BE THROWN. CHECK COMPONENTS
FREQUENTLY, AND REPLACE THEM WITH THE MANUFACTURERS RECOMMENDED PARTS WHEN
NECESSARY.
• CHECK THE BLADE AND MOTOR MOUNTING BOLTS AT FREQUENT INTERVALS FOR PROPER
TIGHTNESS. USE ONLY AUTHORIZED NEUTON REPLACEMENT PARTS.
• KEEP YOUR MOWER FREE OF GRASS, LEAVES, OR OTHER DEBRIS BUILD-UP.
•
ALLOW THE MOWER TO COOL FOR AT LEAST FIVE (5) MINUTES BEFORE SERVICING OR STORING.
•
THE MOWER BLADE IS SHARP, IT CAN AND WILL CUT. WRAP THE BLADE OR WEAR GLOVES, AND USE
EXTRA CAUTION WHEN WORKING ON IT.