Nilfisk-Advance America SR 5120 P/B - Manual (Page 12)

S31NUK5120(3)2001-04 USE
It is possible to adjust the side brush/es turning
speed by means of the dedicated knob.
Select the forward speed by means of the
command lever.
Press the accelerator pedal to start the job.
Note : by releasing the accelerator pedal (or
setting the command lever to the neutral
position) the automatic switch off of all
functions will occur within 8 seconds (Auto
Power Off); the light indicators of the
selected working program and of the
suction fan will start flashing. The
automatic restart of all functions will
automatically occur as soon as the
accelerator pedal will be pushed again
(Auto Power ON).
In order to enable the selection of a
different working program first disable the
previously selected one.
When it is necessary to sweep on a wet floor
stop the suction fan pressing the relevant button,
in order to prevent the damage of the paper
panel filter.
In order to get an efficient cleaning function the
panel filter must always be clean.
Press the filter-shaker button, even if the
machine is working.
This operation must be repeated every 10 to 15
minutes, depending on the kind of rubbish to be
swept; before emptying the dirt container and, in
any case, at the end of the work.
10