NAD C320BEE User Manual
Page 7
ENGLISH
FRANÇAIS
DEUTSCH
NEDERLANDS
ESP
AÑOL
IT
ALIANO
POR
TUGUÊS
SVENSKA
7
Other than the commands relating to the NAD C320BEE amplifier itself,
there are other buttons, which will operate most NAD CD players and
Cassette decks equipped with IR link.
TUNER CONTROL
(for use with NAD Tuner)
Switch the small slider-switch to TUNER (at the base of the remote) to
control the numeric keypad 1 through +10
The TUNER button selects between AM and FM.
TUNE MODE in conjunction with
or
selects respectively
between number station preset and scanning for stations.
CD PLAYER CONTROL
(for use with NAD CD Player)
Switch the small slider-switch to CD (at the base of the remote) to
control the numeric keypad 1 through +10
engages Pause.
engages Stop.
engages Play or toggles between Play and Pause.
or
engages Track skip; Press once to respectively go the next
track or to return to start of current or previous track.
NEXT DISC Go to next disc (for NAD CD changers).
NOTE
Direct sunlight or very bright ambient lighting may affect the
operating range and angle for the remote control handset.
1 Press inand lift tab to remove battery cover from recess
2 Place batteries into recess. Ensure that the alignment of the batteries
matches the ‘+’ and ‘-’ symbols on the casing.
3 Replace battery cover by aligning and inserting the two tabs into the
holes. Press battery cover into place until it clicks closed.
C320BEE IM v2 29/8/02 11:02 pm Page 7