NAD C320BEE User Manual

Page 9

Advertising
background image

9

SPECIFICATIONS

PRE-AMP SECTION
Line level inputs (Disc, CD, Video, Aux, Tuner, Tape1, Tape2)
Input impedance (R and C)

200kΩ + 320pF

Input sensitivity (ref. rated power)

220mV

Maximum input signal

6V

Signal / Noise ratio A-weighted

1

93.0dB ref. 1W

Signal / noise ratio pre-amp out, A-weighted

106dB ref. 500mV

Frequency response 20Hz - 20kHz

<±0.1dB (Tone defeat on)
<±0.5dB (Tone defeat off)

THD + Noise, SMPTE IM

< 0.01% at 5V out

Line level outputs
Output impedance

Pre-out

80Ω

Tape

Source Z + 1kΩ

Maximum output level

Pre-out

>12V

Tape

>10V

Tone controls
Treble

±5dB at 10kHz

Bass

±8dB at 100Hz

IR / Trigger out
Input resistance

>10kΩ

Input voltage

Minimum 5V

Output resistance

<30Ω

Output current

50mA

Output voltage

12V

POWER AMP SECTION
Continuous output power into 8Ω

2

50W (17dBW)

Rated distortion (THD 20Hz - 20kHz)

0.03%

Clipping power (maximum continuous power per channel 4Ω and 8Ω)

68W

IHF Dynamic headroom

8Ω

+3.4dB

4Ω

+5.0dB

IHF dynamic power (maximum short term power per channel)

8Ω

110W (20.4dBW)

4Ω

160W (22.0dBW)

2Ω

210W (23.2dBW)

Damping factor (ref. 8Ω, 1kHz)

>160

Input impedance (R & C)

20kΩ + 470pF

Input sensitivity (rated output into 8Ω)

630mV

Voltage gain

29dB

Frequency response 20Hz - 20kHz

29dB

Signal/noise ratio, A-weighted

ref. 1W

100dB

ref. 50W

117dB

THD + Noise

3

<0.03%

SMPTE IM

4

<0.01%

IHF IM

5

<0.01%

Headphone output impedance

220Ω

PHYSICAL SPECIFICATIONS
Dimensions (W x H x D)

435 x 100 x 290mm

Net weight

6.5kg (14.3lb)

Shipping weight

8kg (17.6lb)

1 From CD input to speakers output, volume setting for 500mV in, 8Ω 1W out

2 Minimum power per chnnel, 20Hz - 20kHz, both channels driven with no more than rated distiortion.

3 Total harmonic distortion, 20Hz - 20kHz from 250mW to rated output

4 Intermodulation distortion, 60Hz - 7kHz, 4:1, from 250mW to rated output

5 CCIF IM distortion, 19 + 20kHz rated output

Dimensions are of unit’s cabinet without attached feet; add up to 18mm for total height.

Dimension depth excludes terminals, sockets, controls and buttons.

ENGLISH

FRANÇAIS

DEUTSCH

NEDERLANDS

ESP

AÑOL

IT

ALIANO

POR

TUGUÊS

SVENSKA

C320BEE IM v2 29/8/02 11:02 pm Page 9

Advertising