National Instruments 6211 - Manual (Page 7)

National Instruments, NI, ni.com, and LabVIEW are trademarks of National Instruments Corporation.
Refer to the Terms of Use section on ni.com/legal for more information about National
Instruments trademarks. Other product and company names mentioned herein are trademarks or trade
names of their respective companies. For patents covering National Instruments products, refer to the
appropriate location: Help»Patents in your software, the patents.txt file on your CD, or
ni.com/patents
.
© 2006–2007 National Instruments Corporation. All rights reserved. 372083B-01 Jan07
Device Components
Table 1 contains information about the components used for interfacing
and interacting with the USB-621x OEM device.
Table 1. USB-621x OEM Components
Component
Reference
Designator(s)
on PCB Manufacturer
Manufacturer
Part Number
50-pin connector J6 * , J7 3M N2550-6002UB
USB connector J5 AMP 787780-1
50-pin board mount socket † — 3M 8550-4500PL (or equivalent)
Mounting standoff,
using board mount socket — RAF Electronic
Hardware M1261-3005-SS ‡
with M3 × 0.5 screw
Mounting standoff,
using ribbon cable — RAF Electronic
Hardware 2053-440-SS **
with 4-40 screw
* J6 is available on USB-6218 OEM devices only.
† You can use either one or both 50-pin connectors to board mount the USB-6218 OEM device.
‡ 3/16 in. HEX female-to-female, 14 mm long.
** 3/16 in. HEX female-to-female, 1/4 in. long.