National Instruments Interface Device NI PCI-1426 - Manual (Page 11)

Chapter 1 Introduction
NI PCI-1426 User Manual 1-4 ni.com
LabVIEW VI creation wizard, Vision Assistant can create LabVIEW VI
diagrams that perform the prototype you created in Vision Assistant.
You can then use LabVIEW to add functionality to the generated VI.
Integration with DAQ and Motion
Platforms that support NI-IMAQ also support NI-DAQ and a variety of
National Instruments DAQ devices. This allows integration between image
acquisition devices and National Instruments DAQ devices.
Use National Instruments high-performance stepper and servo motion
control products with pattern matching software in inspection and guidance
applications, such as locating alignment markers on semiconductor wafers,
guiding robotic arms, inspecting the quality of manufactured parts, and
locating cells.
Camera Link
This section provides a brief overview of the Camera Link standard. Refer
to the Specifications of the Camera Link Interface Standard for Digital
Cameras and Frame Grabbers manual for more detailed information about
Camera Link specifications. This manual is available on several Web sites,
including the Automated Imaging Association site at
www.machinevisiononline.org .
Overview
Developed by a consortium of camera and image acquisition device
manufacturers, Camera Link is a standard for interfacing digital cameras
with image acquisition devices. Camera Link simplifies connectivity
between the image acquisition device and the camera by defining a single
standard connector for both. This standard ensures physical compatibility
of devices bearing the Camera Link logo.
The basis for the Camera Link standard is the National Semiconductor
Channel Link chipset, a data transmission method consisting of a
general-purpose transmitter/receiver pair. The Channel Link driver takes
28 bits of parallel digital data and a clock and serializes the stream to
four LVDS (EIA-644) data streams and an LVDS clock, providing
high-speed data transmission across 10 wires and over distances of up
to 10 m.