Nortel Networks 03050 - Manual (Page 11)

Registering individual portables / 99
P0881594 Issue 02 MICS-XC Norstar-Companion Installer Guide
7. Enter the system name (up to 16 characters), for example
NORTEL 1. (If you are registering to only one system, use
the portable telephone user’s name.)
Press the key that has the letter. For example, to enter A,
press
™, to enter B, press ™™.
Press SPACE to add a blank space to the name.
Press BKSP to remove a mistake.
Press
¯or ˘to move the cursor backward or forward.
8. Press SAVE. The portable displays the registered name, for
example NORTEL 1 registered.
9. Turn off registration for your system.
To confirm that the C3050 is registered
1. Close, then open the portable flap.
If the portable displays the system name that you just
registered, proceed to step 5.
If the portable displays a different system name, or No
system selected, proceed to step 2.
2. Press
Í. The portable displays WIRELESS SYSTEMS.
3. Press the scroll keys (
”
or
’) until the system name
is displayed.
4. Press SELCT (or OK if the correct system is already
selected).
5. Press
Ò or æ . You hear a dial tone, and the portable
displays
[.
If you do not hear a dial tone, check that you have selected
the correct system and try to register the portable again.