Nortel Networks LIP-6812 - Manual (Page 10)

LIP-6812 User Guide
7 June 07
To cancel the Transfer:
1) Press the [Cncl] Softkey.
2.5. Transferring Calls, Blind/Unannounced
You can transfer an active call to another extension without talking to the party who is to receive
the call, using Blind Transfer. The caller is transferred to the new party without verifying that the
new party is there or willing to receive the call.
To transfer an active call:
1) Press [BXfr] Softkey.
2) Dial the number you wish to receive the transfer.
3) Hang up to complete the transfer.
2.6. Call Forward
Call forward directs incoming calls to ring at another location. There are 4 conditions that can
be defined to forward calls:
- Call Forward Busy – redirects incoming calls if the Line is busy.
- Call Forward No Answer – redirects incoming calls if the call is not answered in the
designated time allowed (No Answer time).
- Call Forward Busy or No Answer – redirects incoming call if the Line is busy or, if idle
after No Answer time expires.
- Call Forward All Calls – redirects all incoming calls to a Line you designate.
To set up Call Forward:
1) Press [CFwd] Softkey, and use the [Prev]-[Next] Softkeys to select the desired Call
Forward Condition and press the [ OK ] Softkey.
2) Input the telephone number or address where your calls will be sent and press the [ OK ]
Softkey.
NOTE: When Call Forward is active, “Fwd. to ……..” shows on the LCD screen.
To disable Call Forward:
1) Press [CFwd] Softkey, the message “Fwd. to “ is shown on the LCD screen.