Nortel Networks LIP-6812 - Manual (Page 13)

LIP-6812 User Guide
10 June 07
the DND button must be assigned (refer to the Installer Guide for the steps to configure the
Flexible button).
To activate DND:
1) Press the DND Flexible button; when activated, the button LED will illuminate red, and “Do
not disturb” is displayed on the LCD.
To deactivate DND:
1) Press the illuminated DND Flexible button again, or press the [DND ] Softkey while in an
idle state to enable the DND feature.
2.14. Muting a Call
Mute turns the microphone of the Handset, Headset, or Speakerphone Off. This prevents the
connected party from hearing what is said in the vicinity of the microphone.
To mute the microphone:
1) Press to mute a call; when mute is activated, the button LED is illuminated red.
To activate the Handset, Headset, or Speakerphone microphone:
1) Press again, or lift the handset to deactivate mute.
2.15. Accessing Your Voice Mail
When you have a message waiting, the MSG light will flash and messages may be retrieved. A
MSG button may be assigned to the LIP-6812 (refer to the Installer Guide for the steps to
configure the Flexible button).
To access your voice mailbox:
1) Press a flexible button configured for MSG when the Message Waiting Indicator LED
indicates you have a message and follow the voice instructions.
OR,
1) Use the LCD Menu Navigation buttons to locate the [MSG ] item, and select the [MSG ]
Softkey.
NOTE: To access your voice mailbox, the VMS address must be configured on the LIP Phone
(refer to the Installer Guide for the steps to configure the VMS address).