New Transducers 42PF9830/93 - Manual (Page 13)

13
Source
This menu allows you to select the peripheral equipment you have connected
to the external inputs/outputs.
& Select Source in the Setup menu.
é Press the cursor right.
“ Select the input to which the peripheral equipment is connected.
‘ Press the cursor right again to enter the list of types of peripherals
connected to the selected input.
( Select the peripheral equipment with the cursor up/down.
When you select AV1 , AV2 , AV3 , DVI , HDMI or Side , a list appears
allowing you to identify which type of peripheral equipment is attached to
this input.The TV detects the presence of the connected peripheral
equipment and the signal is routed appropriately..
Digital Audio
Select Digital Audio In 1 or 2 when the TV expects digital audio for a
connected peripheral equipment to come from a Digital audio input.
Make your selection of the source to which the peripheral equipment with
digital audio input has been connected.
In addition to accepting audio input via Digital Audio In, the TV can output
encoded Dolby Digital audio via the
DIGITAL AUDIO OUT connector to
an external amplifier or receiver. If your amplifier or receiver has a
matching connector for Digital Audio In, you can connect it with a single
cable to the TV’s
DIGITAL AUDIO OUT .
See Connect Peripheral Equipment, Digital MultiChannel Surround Receiver,
p. 27.
Settings
Setup
Preferences
Source
Source
AV1
AV2
AV3
DVI
HDMI
Side
Digital Audio In 1
Digital Audio In 2
Info