New Transducers 42PF9830/93 - Manual (Page 8)

8
Searching for and storing TV channels is done channel by
channel.
You must go through every step of the Manual
Installation menu.
Select the menu language
& Press the MENU key on the remote control.
é Use the cursor down to select Installation in the Settings menu.
“ Use the cursor right to enter the Installation menu.
‘ Select Language and enter the list of available languages with the cursor
right.
( Select your language with cursor up/down and press the OK key to confirm
your selection.
§ Proceed with the Installation menu.
Store TV channels
After language is set correctly, you can now search for and store the TV
channels in two different ways: using Automatic Installation or Manual
Installation (tuning-in channel by channel, see further).
Automatic installation
& Select Automatic installation in the Installation menu.
Note: All channels must be unlocked in order to autoprogram. If requested, enter
your code to unlock all channels. (See TV, Features menu, Childlock, p. 17.)
é Press the cursor right to enter the Automatic installation.
The autoprogramming option label
Start now appears.
“ Press the OK key.
‘ Press the green key Start to start autoprogramming.
The menu screen disappears and the progress of autoprogramming is
displayed.
Manual installation
& Select Manual installation in the Installation menu.
é Use the cursor right to enter the Manual installation menu.
“ Select your country or part of the world where you are now located.
‘ Press the cursor down to select Channel.
Enter or select the number where you would like to store the TV channel.
( Press the cursor down to select Search .
The frequency increases until the TV channel is found.
Note: If you know the frequency, enter the 3 or 2 digits of the frequency or the
channel number directly with the digit keys 0 to 9 (e.g. 048).
§ Press the cursor down to select Fine tune .
Press the cursor right and then adjust the frequency with the cursor
up/down in case of poor reception of the channel found.
è Press the cursor left and then press the cursor down to select Store.
Press the cursor right and store the channel found with the OK key.
Repeat steps ‘ to è to search for another TV channel.
Installation
Settings
TV
Setup
Installation
Demo
Exit
Installation
Language
Automatic installation
Manual installation
Reshuffle/rename channels
Preferred channels
Software upgrade
Info
Installation
Manual installation
Channel
Search
Fine tune
Store
Info
Settings
Installation
Language
Automatic installation
Manual installation
Reshuffle/rename channels
Preferred channels
Software upgrade