New Transducers 42PF9830/93 - Manual (Page 2)

2
Do not insert the power plug in a wall socket or hang the TV to the wall
before all connections are made.
& Wall mounting instructions/Table stand/Motorised swivel
How to mount the supplied stand and/or wall mount bracket and the
swivel, see the supplied separate Quick Start Guide.
Caution : Installing the TV requires special skills that should only be
performed by qualified personnel.You should not attempt to do the work
yourself. Philips bears no responsibility for improper mounting or mounting
that results in accident or injury.
Using the supplied bracket to mount the TV:
- You can ask a qualified service personnel about using the bracket to
mount the display on the wall.
- Follow the instructions that come with the bracket before beginning
work.
- Make sure that the wall mount is being fixed securely enough so that it
meets safety standards.The weight of the TV (excl. packaging) is about
42 kg.
é Place or hang the TV wherever you want, but make sure that air can
circulate freely through the ventilation slots. Do not install the TV in a
confined space such as a book case or a similar unit.
To prevent any unsafe situations, no naked flame sources, such as lighted
candles, should be placed in the vicinity. Avoid heat, direct sunlight and
exposure to rain or water.
The equipment shall not be exposed to dripping or splashing.
“ Insert the aerial plug firmly into the aerial socket x at the bottom of the
TV. For best picture quality use the suppressor-aerial cable supplied.
‘ Before installing your TV, connect all your peripheral equipment. See p. 23.
( Insert the mains cord supplied into the mains at the bottom of the TV and
in the wall socket having a mains voltage of 160-276V.
To prevent damaging the power (AC) cord which could cause a fire or
electric shock, do not place the TV on the cord.
§ Remote control : Insert the 2 batteries supplied (Type R6-1,5V).
The batteries supplied do not contain the heavy metals mercury and cadmium.
Please check on how to dispose of exhausted batteries according to local
regulations.
è Switch the TV on : Press the power switch B at the top of the TV.
An indicator on the front of the TV lights up and the screen comes on. If
the TV is in standby mode, press the
-P+ keys or the B key on the remote
control.
Preparation
The first time (and only the first time) you switch on your set, you see an installation introduction screen.
The i nstallation procedure consists of a series of screens that guide you through the process.
& After an introduction screen, you are asked to select a language of the TV’s on-screen-menus.
(The text of the header and the info on screen continuously change language.)
é Press the cursor up/down to highlight your language.
“ Press the ok key.
‘ Follow the instructions on screen to proceed.
Note: Once you completed the initial installation procedure, you may access the screens from the Settings menu. See p.11..
First time installation