New Transducers 42PF9830/93 - Manual (Page 38)

38
Manual software upgrade procedure
For a manual software upgrade copy the “autorun.upg” file in a directory
called “Upgrades” located in the root of the USB portable memory.
& Insert the portable memory that contains the downloaded software
upgrade.
é Select Software Upgrade in the Installation menu. Go to Local
upgrades/applications .
The TV will list all compatible images available on the USB portable
memory and display the data for each selected upgrade image.
“ Select the correct upgrade image and press the red colour key to start the
upgrade.
Your TV will restart and will automatically go to the upgrade mode. After a
few seconds it will display the status of the upgrade procedure.
Warning :
If you try to upgrade to a software version equal or lower than the current version,
a confirmation will be asked. Downgrading to older software should only be done
in case of real necessity.
‘ When the software upgrade was successful, remove the USB portable
memory and restart your TV with the power switch B at the top of the
TV.Your TV will start up with the new software.
Automatic software upgrade procedure
& Switch off your TV and remove all memory devices.
é Insert the USB portable memory that contains the downloaded software
upgrade.
“ Switch on your TV with the power key B at the top of the TV.
‘ At startup the TV will scan the USB portable memory until it finds the
update content.The TV will automatically go to the upgrade mode. After a
few seconds it will display the status of the upgrade procedure.
Warning :
• You are not allowed to remove the USB portable memory during the software
upgrade procedure!
• In case of a power drop during the upgrade procedure, don’t remove the USB
portable memory from the TV. The TV will continue the upgrade as soon as the
power comes back.
• If you try to upgrade to a software version lower than the current version, a
confirmation will be asked. Downgrading to older software should only be done in
case of real necessity.
• If an error occurs during the upgrade you should retry the procedure or contact
your dealer.
( When the software upgrade was successful, remove the USB portable
memory and restart your TV with the power switch B at the top of the
TV.
Your TV will start up with the new software.
Note: Once the upgrade is finished use your PC to remove the TV software from
your USB portable memory.
Software upgrade
Current software info
Local upgrades/applications
Info
Settings
Installation
Language
Automatic installation
Manual installation
Reshuffle/rename channels
Preferred channels
Software upgrade
Software Id: TL32E-234
Loading Done
Validating Done
Programming
Software Upgrade Application
Upgrade busy...