Nikon AF-S Nikkor 300mm f/2.8G ED VR II - Manual (Page 26)

26
Jp
En
De
Fr
Es
Se
Ru
Nl
It
Ck
Ch
Kr
The built-in flash and vignetting
To prevent vignetting, do not use the lens hood.
Cameras
Vignetting occurs at any
shooting distance.
F65-Series/N65-Series*, F60-Series/N60*, F55-Series/N55-Series*,
F50-Series/N50*, F-601/N6006*, F-401x/N5005*, F-401s/N4004s*,
F-401/N4004*, Pronea 600i/6i*, Pronea S
* Sold exclusively in the USA
Using the lens hood
Lens hoods minimise stray light and protect the lens.
Attaching the hood
• Fully tighten the lens hood screw (2).
• If the lens hood is not correctly attached, vignetting
may occur.
• To store the lens hood, attach it in the reverse
position.
Slip-in filter holder
Always use a (52mm screw-on) filter. A 52mm Screw-on NC Filter is attached to
the filter holder when shipped from the factory.
a Press down on the slip-in filter holder knob, and turn
counterclockwise until the white line on the knob is
at a right angle to the axis of the lens.
b Pull the slip-in filter holder from the lens body
c Detach the attached filter from the filter holder.
d Screw a filter onto the side of the filter holder
marked with the words “Nikon” and “JAPAN”.
• The slip-in filter holder can be attached either facing
lens or camera side without having any effect on your
pictures.
Slip-in Circular Polarizing Filter C-PL1L (optional)
• Blocks reflections from nonmetallic surfaces such as glass and water.
• The focus point of a Slip-in Circular Polarizing Filter C-PL1L differs from that of
a 52mm screw-on filter. The distance scale is shifted from the correct position.
The closest focused distance is extended slightly.
• The memory set position may change slightly when using focus preset. Attach
the C-PL1L filter before using the memory set function.