NETGEAR DG834GUV5 - Manual (Page 109)

DG834GUv5 Wireless Router with Built-in DSL Modem User Manual
v1.0, May 2009
USB Drive Requirements
The DG834GUv5 Wireless Router conforms to the USB 1.0 and 1.1 (USB Full Speed) and
2.0 (USB High Speed) standards. The approximate USB bus speeds are shown below.
Actual bus speeds will vary, depending on the CPU speed, memory, speed of the network, and
other variables.
The DG834GUv5 should work with all USB-compliant external flash and hard drives. For the
most up-to-date list of USB drives supported by the DG834GUv5
Router, go to:
http://kbserver.netgear.com/kb_web_files/n101300.asp
The USB port on the DG834GUv5 can only be used to connect
USB storage class devices like hard drives. USB modems, printers, CD ROM drives, and DVD
drives cannot be connected to the device.
Note: The USB port on the DG834GUv5 can be used with one USB hard drive at a time. Do not
attempt to use a USB hub attached to the USB port.
The DG834GUv5 supports FAT, FAT32, NTFS (read only) and Linux file systems. As soon as a
USB hard disk or flash memory is attached to DG834GUv5 USB port, users on the local area
network can access the USB drive with full read and write access.
Using the USB Drive Setup Wizard to Allow Remote Access
from the Internet
You can use the USB Drive Wizard to quickly and easily share directories on the USB drive after
you have attached it to the router.
1. Log in to the DG834GUv5 router at its default LAN address of http://10.0.0.2 with its default
user name of admin and default password of admin, or using whatever LAN address and
password you have set up
8-7