Nuvo T2 - Manual (Page 17)

AUX Input
Disable/Enable: The T2 has an auxiliary audio input
that allows access through either of the tuners to an
additional audio source. To use this you must first
enable the input in the menu options.
AUX Gain: The audio input from an auxiliary source
can be adjusted to match the output of the T2's Tuner
A and Tuner B. AUX Gain is selected by using the Select
knob to scroll to that choice and press to enter. Once
AUX Gain is selected, amount of input up and down is
then controlled and set by using the Select knob to
adjust up or down, and then pressing the knob when
the desired gain setting has been reached, fig. 18.
Noise Blanking
Disable/Enable: This is an AM/FM function. The T2
default setting is to have noise blanking (partial to
complete muting of weak noise signals) Enabled. For
areas of T2 operation having a very low interference
level, it may be desirable to select this menu item and
set Disabled in order to listen to very distant, weak
stations.
PUSH TO
ENTER
SELECT Tuner A
Aux Gain Set:
Output +5 dB
FM STEREO•AM•WEATHER
Fig. 18
Page 16
RS232 Communication
The T2 has a serial communication port. This allows for
complete control of the T2 functions by RS232 control devices.
The necessary protocol for this control is available through the
NuVo Website Prozone at
. www.nuvotechnologies.com/prozone