Nuvo T2 - Manual (Page 27)

4.5 AUX Input
Page 26
4.5 AUX Input: The T2 has an additional input that allows an
external device to be controlled through the T2's IR pass
through. When this input is enabled, the level of the signal
input can be adjusted up or down to match the tuners' signal
output level.
5.0 Advanced Presets
The preset tab in the advanced settings has additional features
for specific preset setup.
5.1 High Cut: High-Cut is rarely used, but it can be a useful
function for a weaker AM signal that tends to have high-
frequency hiss. This drop down menu allows you to select a
frequency cut-off for high-frequency reception. Any audio
above the chosen frequency will be filtered.
5.1 High Cut
5.2 Level: This slider changes the signal level of the station.
This is especially useful for stations, such as many Public
Broadcasting System affiliates, that broadcast an
uncompressed signal with a lower volume level than other
stations. This makes it possible for all stations to have the
same volume level as the user accesses presets.
5.1 Level
4.4 Audio: Output Level increases or decreases the level of
signal from the audio output of each tuner. This setting and
balance, treble, and bass are best left at the default settings
for use with an audio distribution system such as NuVo
systems, that have built-in equalization capability. You may
want to make adjustments when the T2 is being used as a
stand-alone component with an amplifier.
4.4 Audio Output Level