Nuvo T2 - Manual (Page 30)

When I use Seek or Scan tuning, the tuner misses some
stations that I can receive in the manual STEP tune mode.
There is a lot of hiss and extra noise on some of the AM
stations.
I want to have another audio source connected to the “AUX”
input, but I have no audio when I switch to that source.
Congratulations, your listening area is relatively free from
interference! You should lower the “seek threshold” by
going to MENU Adv. Settings Seek Threshold, selecting FM
Threshold or AM Theshold as appropriate, and rotating the
SELECT knob counter clockwise. This will move the display
indicator toward LOW. Alternatively, you can do this in your
T2 Configurator by going to the Config page, selecting View-
Advanced from the page menu, and dialing in the lower
threshold in the Seek/Scan Levels select box. This is found in
the “Tuning Parameters” section of the Windows page at the
lower right.
This is a common occurrence with some AM stations that have
a weaker signal. This can be minimized in the T2 Configurator
software by using the “High-Cut” feature in the Advanced
Preset settings. See “5.1 High Cut” on page 23 for detailed
instructions for using this feature.
Remember, you have to Enable the “AUX” input either at the
front panel through the advanced menu options, page 14, or
in the T2 Configurator software in the Advanced Config, page
23.
Page 29
Troubleshooting
Symptom Remedy
XM Tuner display shows “Check Antenna”. XM antenna is not connected. Make sure that the coaxial
cable connection is good at the antenna and the back of the
T2.
XM Tuner display shows “Updating”.
XM Tuner display shows “No Signal”.
XM Tuner display shows “Loading”.
XM Tuner display shows “Off Air”.
XM Tuner display shows “XM ---”.
XM Tuner display shows “---4”.
XM is updating the encryption code. Wait for process to
finish.
XM is experiencing a loss of signal. Wait and see if condition
is temporary. Check the antenna position.
Tuner is acquiring channel audio or information.
The selected channel is not in service.
This is a temporary display indicating the desired channel is
no longer available, or no channel is available for the chosen
category.
Corresponding artist name/feature, or song/program title are
null (empty).