Appendix b connecting i/o signals, Ix b, Connecting i/o signals – National Instruments NI 781xR User Manual
Page 33
Advertising
© National Instruments Corporation
B-1
B
Connecting I/O Signals
This appendix describes how to make input and output signal connections
to the NI 781xR I/O connectors.
The NI 781xR has four DIO connectors with 40 DIO lines per connector.
Figure B-1 shows the I/O connector locations for the NI 781xR. The I/O
connectors are numbered starting at zero.
Advertising