N-Tron Industrial Ethernet Switch 900 - Manual (Page 8)

Rev050908 8
PACKAGE CONTENTS
Please make sure the Ethernet Switch package contains the following items:
1. 900 Series Ethernet Switch
2. Installed Modules
3. This Installation Guide
Contact your carrier if any items are damaged.
INSTALLATION
Read the following warning before beginning the installation:
WARNING
The 902FXE and 904FXE unit contain a class 1 laser. Do not stare into the laser beam (fiber optic
connector) when installing or operating the product.
Never install or work on electrical equipment or cabling during periods of lightning activity.
Disconnect the power cable before removing the enclosure top.
Do not operate the unit with the top cover removed
UNPACKING
Remove all the equipment from the packaging, and store the packaging in a safe place.
File any damage claims with the carrier.