Nortec NH Series User Manual

Page 54

Advertising
background image

10-20

Page 47
2008-08-28

Figure 12. Difference from Setpoint in

Relation to Demand Signal

Figure 13. Duct and Wall Mounted

Transducer

D.

NORTEC LINKS 2 OPERATION

(1) NORTEC LINKS 2 is an option that can be integrated with the NHTC. This allows a

BMS to monitor and in the right configuration, control the humidifier. For additional
information about NORTEC Links and its operation and configuration, go to

www.humidity.com

and look up the NORTEC LINKS 2 manual.

(2) Table 5 contains a list of NORTEC LINKS 2 variable definitions. For a complete list,

contact the factory.

E.

NORTEC ONLINE OPERATION

(1) NORTEC OnLine is an option that can be integrated with the NHTC. This allows a user

to log onto the internet, go to

www.norteconline.com

and log in to allow them to monitor

their unit from any computer with an internet connection. (See Figure 14)

(2) After initially logging into the NORTEC OnLine server the user will be presented with a

list of humidifiers currently registered with the Server program. Each humidifier will be
listed with a unit type identifier, a serial number and an address descriptor.

(3) By clicking on the humidifier name, the user will then be brought to a status screen with

an image of the selected humidifier.

(4) Figure 14 shows a typical NORTEC OnLine Monitoring Screen. Use this manual in

combination with NORTEC OnLine to be able to monitor and understand the settings
possible through the NORTEC OnLine Interface.

Advertising