NAD C660 - Manual (Page 22)

GB
22
PLAYBACK
Playback Chapter 4
BASIC OPERATION
1 Turn on the power and load a disc See page 13 for details.
2 Press PLAY on the front panel for the appropriate deck. Alternatively, press CD PLAY or CD
REC for the desired deck and then PLAY on the remote control. will appear and the track
number being played and the running time of the track will be displayed.
WHEN THERE IS A DISC IN EACH DECK
The player will respond in one of two ways depending on whether the dual play setting is activated or not.
See page 26 for details.
IN NORMAL MODE (SINGLE PLAY MODE)
When the disc in one deck finishes, the disc in the other deck will begin to play.
IN DUAL MODE
Each deck will operate as a separate, single play CD unit without regard to the status of the other deck.
WHEN “ERROR” IS DISPLAYED
Non-finalized CD-R/RW discs will not play in the play deck. Play the disc in the record deck.
TO STOP PLAYBACK
Press STOP on the front panel for the appropriate deck.
Alternatively press CD PLAY or CD REC for the desired deck and then STOP on the remote control.
TO PAUSE PLAYBACK
Press PAUSE on the front panel for the appropriate deck.
Alternatively press CD PLAY or CD REC for the desired deck and then PAUSE on the remote control.
Press either PLAY or PAUSE to resume playback.
TO SKIP THE TRACK
To skip forward to other tracks during playback, pause or stop, press FORWARD SKIP/SCAN on the front
panel as many times as necessary, or press CD PLAY or CD REC on the remote control for the desired deck
and then press FORWARD SKIP/SCAN. To skip backward, use REVERSE SKIP/SCAN.
TO SEARCH THE TRACK
To move forward through the disc, press and hold FORWARD SKIP/SCAN on the front panel, or press CD
PLAY or CD REC on the remote control for the desired deck and then press and hold FORWARD SCAN. To
move backward, use REVERSE SKIP/SCAN on the front panel or REVERSE SKIP/SCAN on the remote control.
PLAYING A SPECIFIC TRACK (DIRECT PLAY)
To go directly to a specific track on a disc, enter the track number using the numbered buttons.
When selecting a two digit track number, the second number must be entered within 3 seconds after the
first number pressed.
INTRO SCAN PLAY
The first portion of each track will be played 10 seconds sequentially by pressing CD PLAY INTRO or CD
REC INTRO button. When the CD PLAY INTRO or CD REC INTRO button is pressed again, the intro mode
will be released. While the disc is being played as Intro Scan the Information Display will show track number
and elapsed time.
COAXIAL
CD
TRACK TIME
SINGLE
CDP
R L
Track number
being played Elapsed time of
the current track
C660 manual 27/2/01 6:03 pm Page 22