How to bypass the configuration assistant – NETGEAR CA 95054 User Manual
Page 23
Advertising
NETGEAR Router Setup Manual
Connecting the Router to the Internet
3-11
August 2004
How to Bypass the Configuration Assistant
1.
When the router is in the factory default state, type
http://www.routerlogin.net/basicsetting.htm in the address field of your browser, then click
Enter.
When the router is in the factory default state, a user name and password are not required.
2.
The browser will then display the router settings home page shown in
“Login result: RP614 v3
home page” on page 3-10
.
If you do not click Logout, the router will wait 5 minutes after there is no activity before it
automatically logs you out.
Advertising