NETGEAR CA 95054 - Manual (Page 27)

NETGEAR Router Setup Manual
Connecting the Router to the Internet 3-15
August 2004
2. For security reasons, the router has its own user name and password. When prompted, enter
admin
for the router user name and
password for the router password, both in lower case
letters. To change the password, see “Changing the Administrator Password” on page 5-8
Note: The router user name and password are not the same as any user name or password you
may use to log in to your Internet connection.
Once you have entered your user name and password, your Web browser should find the
router and display the home page as shown in
“Login result: RP614 v3 home page” on page
3-10 .
3. Click Setup Wizard on the upper left of the main menu.
4. Click Next to proceed. Input your ISP settings, as needed.
5. At the end of the Setup Wizard, click the Test button to verify your Internet connection. If you
have trouble connecting to the Internet, use the Troubleshooting Tips
“Troubleshooting Tips”
on page 3-6 to correct basic problems, or refer to Chapter 7, “Troubleshooting .”