Figure 10, Attach devices to the mda ports, Figure 10 installing an mda 4 – Nortel Networks Media Dependent Adapters 302403-G User Manual
Page 28
Advertising
26
Figure 10 Installing an MDA
4
Press the MDA firmly into the Uplink/Expansion Module
slot.
Be sure that the MDA is fully seated into the mating
connector.
5
Secure the MDA by tightening the thumb screws on the
MDA front panel.
6
Plug the AC power cord into the back of the switch, or plug
the switch module into the switch backplane.
7
Attach devices to the MDA ports.
BS45059C
Uplink/Expansion Module
28
26
27
25
1 = Card guides
2 = Uplink module slot
2
1
400-4TX MDA
Activity
100
10
F Dx
Advertising