Network Computing Devices 300 - Manual (Page 17)

NCD ThinSTAR 300 Basics
NCD ThinSTAR 300 User’s Guide 1-13
or
Press CTRL+ALT+UP_ARROW or
CTRL+ALT+DOWN_ARROW to cycle through the list of
active connections. The connection list reflects the
order in which the connections were started, the most
recent being on top. See the Hot Keys section that
follows for details.
Hot Keys
If the Terminal Properties > Management tab > Enable
Connection Hot Keys option is enabled, the following hot
keys are available.
To switch between connections, without using the
Connection Manager:
CTRL+ALT+UP_ARROW and
CTRL+ALT+DOWN_ARROW
To switch to the default connection or start the default
connection:
CTRL+ALT+HOME
If hot keys are not enabled, use the instructions given in
“Starting Multiple Connections” on page 1-12 to switch
between active connections.
Logging Off
To log off and end your session:
1. If you connected to an application instead of a server’s
desktop, closing the application terminates the
connection.
2. If you connected to a server’s desktop:
a. Close all applications.
b. Click
Start on the taskbar at the bottom of the
Terminal Server desktop.