Network Computing Devices 300 - Manual (Page 29)

In Case of Trouble
NCD ThinSTAR 300 User’s Guide 3-3
Fixing an Address Problem
If all cables are plugged in securely, the problem may be
that the terminal cannot find the address information
required for network communication. Contact your
system administrator.
If the system administrator is able to fix the problem on
the Terminal Server host, click
Restart when told to do
so.
If you have to fix the problem at the terminal:
1. Obtain the necessary address information from the
system administrator.
2. Click Advanced Setup . The Terminal Properties
Network tab displays.
3. Enter the address information obtained from your
system administrator and click OK . The Terminal
Settings Change panel displays.
4. Click Yes . The terminal restarts.
An Upgrade Message Displays
Each time it is turned on, the NCD ThinSTAR 300 checks
the network for a newer version of its operating software.
If it detects that an upgrade is necessary, it displays the
upgrade message shown in Figure 3-2.