Netopia R2020 - Manual (Page 38)

3-10 User’s Reference Guide
Note: You can also use these instructions to configure other computers on your network to accept IP addresses
ser ved by the Netopia R2020.
1. Go to the Star t
Menu/Settings/Control
Panels and double click
the Network icon. From
the Network components
list, select the
Configuration tab.
2. Select TCP/IP-->Your Network Card. Then select
Properties. In the TCP/IP Proper ties screen (shown
below), select the IP Address tab. Click “Obtain an IP
Address automatically.”
3. Click on the DNS Configuration tab. Click Disable DNS.
DNS will be assigned by the router with DHCP.
4. Click OK in this window, and the next window. When
prompted, reboot the computer.