Northern Modular Telephone - Manual (Page 32)

• • • • 29 • • • •
Special features
Hot Line
The system administrator can program a Hot Line telephone number that is dialed automatically.
To use Hot Line:
1.
Press ¥. The Hot Line number is dialed automatically.
or
If your main line is a Hot Line, lift the handset. The Hot Line number is dialed automatically.
Intercom
You can use the Intercom feature to call a member of your intercom group.
To make an Intercom call:
1.
Lift the handset and press Ω.
2. Dial the one- or two-digit code for the intercom group member you wish to call.
To answer an intercom call when you are on a line other than your intercom group line:
1.
Press ˙to put the current call on hold, or press Rto terminate the call.
2. Press Ωand begin speaking.
Make Busy
Make Busy allows you to make your telephone appear busy/engaged to all callers.
To make your telephone appear busy/engaged:
1.
Press ¡, or lift the handset and enter the Make Busy FFC.
To receive calls again:
— Press
¡ again, or lift the handset and enter the Make Busy FFC.
Malicious Call Trace
Malicious Call Trace provides a way for you to trace nuisance calls within your system.
To trace a call:
1.
Answer the call.
2. Press ≠, or enter the SPRE code plus °‹, or enter the Trace FFC. If you do not
have a ≠button, pressing † or øwill initiate a trace. Keep the
caller on the line to allow time to trace the call. If you pressed † or ø, the
call is taken off hold as soon as it is traced.