National Instruments NI-488.2 User Manual
Page 128
Index
© National Instruments Corporation
I-3
ELCK error code, C-10
END status word condition, 4-5, B-1, B-2
ENEB error code, C-6
ENOL error code, C-4
EOI (end or identify) line (table), A-4
EOIP error code, C-7
EOS
configuring EOS mode, 8-1
EOS comparison method, 8-1
EOS read method, 8-2
EOS write method, 8-1
EPWR error code, C-12
ERR status word condition, 4-5, B-1, B-2
error codes
error codes and solutions
EABO, C-5
EADR, C-4
EARG, C-5
EARM, C-10
EBUS, C-8
ECAP, C-7
ECIC, C-3
EDVR, C-2
EFSO, C-8
EHDL, C-10
ELCK, C-10
ENEB, C-6
ENOL, C-4
EOIP, C-7
EPWR, C-12
ERST, C-11
ESAC, C-5
ESRQ, C-9
ETAB, C-9
EWIP, C-11
GPIB error codes (table), C-1
error conditions
communication errors
repeat addressing, 5-3
termination method, 5-3
configuration errors, 5-2
Interactive Control utility, 7-11
timing errors, 5-2
error tracking with NI Spy, 6-2
error type reporting, 4-6
error variable (iberr), 4-6
ERST error code, C-11
ESAC error code, C-5
ESRQ error code, C-9
ETAB error code, C-9
Ethernet Device Configuration
Event Status bit (ESB), 8-13
EWIP error code, C-11
examples (NI resources), E-1
execute function n times (n *) function,
Interactive Control utility, 7-10
execute indirect file ($) function, Interactive
execute previous function n times (n * !)
function, Interactive Control utility, 7-10
exit or quit (q) function, Interactive Control
F
FindLstn function, 4-10
FindRQS function