Eizo T965 - Manual (Page 18)

18
3. SCREEN ADJUSTMENT
3-4. Power Save
There are two power save settings. Choose the setting which matches your
environment.
Set the power saving setting by using <Others> menu.
• Do your part to conserve energy, turn off the monitor when you are finished using
it. Complete energy use can only be accomplished by disconnecting the monitor’s
power supply cord from the plug receptacle.
To use the PC’s power saving system (VESA DPMS p.31) )
Ж Ж Ж Ж Ж Select “ON” in the <PowerManager> menu.
[Procedure]
(1) Set the PC’s power saving settings.
(2) Select “ON” in the <PowerManager> menu.
[Power saving system]
PC Signal Screen LED
ON Operation Green
STAND-BY Blank screen Green
SUSPEND Power save (Mode 1) Flashing green
OFF Power save (Mode 2) Yellow
To use the Monitor’s off timer system
Ж Ж Ж Ж Ж Select “ON” in the <Off Timer> menu.
Without the PC’s power saving system, the off timer allows the monitor to enter
a powersave mode after a predetermined amount of time has lapsed.
[Procedure]
Select “ON” and press the left/right keys on the control pad to set the “On
period”. (1 to 23 hours)
Press any direction of the control pad or to turn the power off then on again to
return to a normal screen.
[Power saving system]
Time Screen LED
On period (1-23H) Operation Green
Last 15 min. in“On period” Advance notice* Flashing green
“On period” expired Power save mode Flashing yellow
* To delay entering the power save mode, press any direction of the control pad
during the advance notice mode. The monitor will continue to operate for an
additional 90 minutes.