Eizo T965 User Manual
Page 25
5. TROUBLESHOOTING
25
ENGLISH
12. The Auto sizing function
does not work properly.
13. ScreenManager or AUTO/
FINE MODE button does
not operate.
14. Two horizontal hairlines
are visible on the screen.
Push the AUTO/FINE MODE button for more than 2
seconds. (p. 12)
The Auto sizing function is intended for use on the
Macintosh and on AT-compatible PC running Windows.
It may not work properly in either of the following cases.
• You are running an AT-compatible PC on MS-DOS
(Not windows).
• The background color for the “wall paper” or
“desktop”pattern is set to black.
Some signals from graphics card may not function
properly.
The Adjustment Lock is probably on.
To unlock: Turn off the monitor power, then hold down
the AUTO/FINE MODE button once again and turn the
power back on. (p. 19)
These are damper wires.
[About Damper wires]
Damper wires are used to support the CRT’s aperture
grille, and are visible as thin dark lines across the screen.
All EIZO aperture grille type CRTs include two such
horizontal wires.
The aperture grille itself is a grid of taut metal filaments
that spans the entire screen from top to bottom.
Problems
Points to check with possible solutions