Eizo T965 - Manual (Page 19)

3. SCREEN ADJUSTMENT
19
ENGLISH
MD-C53A (Optional)
Apple Macintosh
(Blue & White)
Standard graphics board
Æ
3-5. Adjustment Lock
Use the “Adjustment Lock” function to prevent any accidental changes.
Locked function
• Adjustments and settings in the ScreenManager.
• AUTO/FINE MODE button.
Unlocked function • Adjustment of contrast and brightness by the shortcut keys.
• BNC/D-Sub Selection button.
[To lock]
Press on the AUTO/FINE MODE button while switching on the monitor’s power.
[To unlock]
Switch off the monitor’s power, then hold down the AUTO/FINE MODE button
once again and turn the power back on.
3-6. Connecting two PCs to the Monitor
Two PCs can be connected to the monitor through the BNC/D-Sub input connections
on the back of the monitor.
(Example)
Selecting the active input
Every time the BNC/D-Sub selection button is pressed, the input changes in
order.
[Automatically selecting the priority input signal for screen]
The monitor will automatically detect the inputted signal of either the BNC or
D-SUB connection for display. In the following cases, the signal given
preference will be displayed automatically.
• When the monitor is turned on.
• Once a priority is selected in the <Input Priority> function, whenever a
change of signal is detected at the selected input, the monitor will switch the
input to that signal.
(How to give priority to the input)
(1) Select <Input Priority> in the <Others> menu.
(2) Select <Auto> and set BNC or D-SUB input.
Saving the adjustment data
The adjustment data can be saved for both signals. However, the following
adjustment and setting data can be saved for each input signal (BNC/D-Sub).
<Contrast>, <Fine Contrast>, <Temperature>, <Custom>, <sRGB>,
<Signal Filter 1>, <Signal Filter 2> and <Color Correction>