Specifications – Eizo T965 User Manual
Page 28
28
7. SPECIFICATIONS
7. SPECIFICATIONS
CRT
55 cm (21 inch) class, 90° deflection Tension Mask
with Anti- Reflective SuperErgoCoat
®
CRT AG Pitch
0.24 mm
Scan Frequency
Horizontal
30 kHz- 130 kHz (Automatic)
Vertical
50 Hz-160 Hz (Automatic)
Recommended Resolution
1600 dots x 1200 lines
Max. Active Display Area*
1
400 mm (H) x 298 mm (V) (15.7” (H) x 11.7” (V))
(Viewable image size: 498 mm (19.6”))
Power Supply
100-120/200-240 VAC±10%, 50/60 Hz, 2.2 A/1.1 A
Power Consumption
Normal/Max.: 160 W/ 200 W**
(**
With EIZO optional speaker & USB attached)
PowerManager Mode 1: Less than 10 W
PowerManager Mode 2: Less than 3 W
Input Connector
D-Sub mini 15-pin and BNC × 5 (Switchable)
Input Signal
Sync
a) Separate, TTL, Positive/Negative
b) Composite, TTL, Positive/Negative
c) Sync on Green, 0.3 Vp-p, Negative
Video
Analog 0.7 Vp-p/75
Ω, Positive
Signal registration
20 signals (Factory preset 2 modes)
Plug & Play
VESA DDC 2B
Dimensions
494 mm (W) x 486 mm (H) x 520 mm (D)
(19.4” (W) x 19.1” (H) x 20.5” (D))
Weight
36.0 kg (79.4 lbs.)
Temperature
operating: 0°C to 35°C (32°F to 95°F)
storage: -20°C to 60°C (-4°F to 140°F)
Humidity
30% to 80% R.H. Non-condensing
Certifications and Standards
100-120 VAC
NRTL/C-TÜV, FCC-B, DHHS, TCO’99*
2
, EPA
ENERGY STAR
®
Program
200-240 VAC
CE, CB, TÜV Rheinland/GS, TCO’99*
2
, EPA
ENERGY STAR
®
Program, TÜV Eco Circle 2000
USB specification
USB standard
Rev. 1.1 complied self-powered hub
USB Monitor Control
Rev. 1.0 complied
Class Standard
Communication speed
12 Mbps (full), 1.5 Mbps (low)
Downstream power supply
500 mA for each (Max.)
USB ports
Upstream port x 1, Downstream port x 4
*
1
Display size can be set by the user through microprocessor control panel. The
actual size displayed can be dependent on the graphics board or PC utilized.
*
2
Applicable to gray (standard) color version only.
•
Factory Defaults
Default settings are as follows.
<Contrast>
100% / 50%
<Moiré Reduction>
0%
Fine Contrast
Text
<Signal Filter1>
Mode 1
<Signal Filter2>
100%
<PowerManager>
On
<Color>
Standard/9,300K <Off Timer>
Off
<Beep>
On
<Language>
English
<Input Priority>
Auto D-Sub
<Movie Mode>
1