Network Equipment Technologies 500 - Manual (Page 19)

Installation 2-7
Software installation
The PAP software is installed as part of the PrimeSwitch Manager—NCS (Net Center
Software) installation process.
To install individual versions:
1 Create a directory for the PAP software. Type:
MD \PAP <Enter>
2 Change to this directory. Type:
CD \PAP <Enter>
3 Insert the PAP disk (PM-NCS Disk 3) into the floppy drive and change to the PAP
subdirectory. Type:
CD A:\PAP <Enter>
4 Expand the required file. Type:
expand A:PAPTS14.EXE <Enter>
expand A:PAPTS13.EXE <Enter>
expand A:PAPETSI.EXE <Enter>
expand A:PAPETSIB.EXE <Enter>
expand A:PAPDASS2.EXE <Enter>
expand A:PAPDPNSS.EXE <Enter>