Network Equipment Technologies 500 - Manual (Page 35)

Commands 4-5
Help
Displays information relevant to the currently selected command or operation.
To get more help, press C to display a list of commands or T to display a list of topics.
Move the pointer with the cursor keys and press Enter to select.
Press Esc or Q to return to normal operation.
Info
Displays a list of Information Elements and their values.
L2
Changes the display of layer 2 protocol activity. The display level (as indicated on the
top line) has four settings:
--- no display of layer 2
E2 only exception conditions are shown; RR and INFRO frames are
suppressed
L2 full display of layer 2
HEX display in hexadecimal
All layer 2 activity is buffered/captured at all times regardless of this setting.
L3
Changes the display of layer 3 protocol activity. The display level (as indicated on the
top line) has two settings:
-- no display of layer 3
L3 display of layer 3
All layer 3 activity is buffered/captured at all times regardless of this setting.
Long
Selects long display of layer 3. The display includes Message Type, each Information
Element and the full interpretation of each octet within the Information Elements. LONG
appears on the status line.