Break-in schedule -34 – NISSAN 2010 GT-R Sports Sedan User Manual

Page 213

Advertising
background image

Black plate (212,1)

Model "R35-D" EDITED: 2009/ 3/ 11

lever is moved to the

&

N

or

&

P

position or on a

flat and level road.

NOTE:

This system does not function when the
Vehicle Dynamic Control VDC) system
warning appears on the vehicle informa-
tion display located in the tachometer.
(

“VEHICLE DYNAMIC C ONTROL

(VDC) SYSTEM WARNING” page 2-35)

NOTICE

Follow these recommendations to ob-
tain maximum engine performance and
ensure the future reliability and econo-
my of your new vehicle. Failure to
follow these recommendations may
result in shortened engine life and
reduced engine performance.

Please observe the following types of driving
until the mileage shown below has been
reached.

Until 300 miles (500 km):

. Do not depress the accelerator pedal more

than halfway and avoid rapid acceleration.

. Drive with the engine speed kept at less

than 3,500 RPM.

. Avoid unnecessary quick steering, abrupt

braking and driving on poor roads.

300 to 600 miles (500 to 1,000 km)

. Avoid rapid acceleration in a low gear (1st to

3rd gears) with the accelerator pedal fully
depressed. Depress the pedal slowly.

. Avoid unnecessary quick steering and

abrupt braking.

. Drive with the suspension setup switch in

the COMF mode to allow more suspension
stroke.

600 to 1,200 miles (1,000 to 2,000 km)

. Drive with the engine speed kept relatively

high. Shifting is recommended between 1st
and 4th gears.

. Avoid unnecessary quick steering and

abrupt braking.

. Drive with the suspension setup switch in

the COMF mode to allow more suspension
stroke.

5-34

Starting and driving

BREAK-IN SCHEDULE

Advertising