NISSAN 2010 GT-R Sports Sedan - Manual (Page 55)

Black plate (52,1)
Model "R35-D" EDITED: 2009/ 3/ 11
Top tether anchor point locations
Anchor points are located on the rear parcel
shelf.
Installing top tether strap
First, secure the child restraint with the LATCH
system (rear bench outboard seating positions
only) or the seat belt, as applicable.
Flip up the anchor cover from the anchor point
which is located directly behind the child seat.
Position the top tether strap over the top of the
seatback and secure it to the tether anchor
bracket that provides the straightest installation.
Tighten the strap according to the manufac-
turer’s instructions to remove any slack.
If you have any questions when installing a
top tether strap child restraint on the rear
seat, consult your GT-R certified NISSAN
dealer for details.
CHILD RESTRAINT INSTALLATION
USING LATCH
WARNING
. Attach LATCH system compatible
child restraints only at the locations
shown. If a child restraint is not
secured properly, your child could
be seriously injured or killed in an
accident. (
“Lower Anchors and
Tethers for CHildren SYSTEM
(LATCH)” page 1-16)
. The LATCH anchors are designed to
withstand only those loads imposed
by correctly fitted child restraints.
Under no circumstance are they to
be used for adult seat belts or
harnesses.
. Inspect the lower anchors by insert-
ing your fingers into the lower
anchor area and feeling to make
sure there are no obstructions over
the LATCH anchors, such as seat
belt webbing or seat cushion mate-
rial. The child restraint will not be
secured properly if the LATCH an-
chors are obstructed.
Front-facing — step 2
Front-facing
Follow these steps to install a front-facing child
restraint using LATCH system:
1. Position the child restraint on the seat.
Always follow the child restraint manufac-
turer’s instructions.
1-18 Safety — Seats, seat belts and supplemental restraint system