Jump starting -17, Drive belts -17 – NISSAN 2010 GT-R Sports Sedan User Manual

Page 260

Advertising
background image

Black plate (263,1)

Model "R35-D" EDITED: 2009/ 3/ 11

1. Remove the cell plugs

*

A

.

2. Add distilled water up to the UPPER LEVEL

*

1

line.

If the side of the battery is not clear, check
the distilled water level by looking directly
above the cell; the condition

*

1

indicates

OK and the conditions

*

2

needs more to

be added.

3. Tighten cell plugs

*

A

.

Vehicles operated in high temperatures or under
severe conditions require frequent checks of the
battery fluid level.

JUMP STARTING

If jump starting is necessary, see the following
section. (

“JUMP STARTING” page 6-4)

If the engine does not start by jump starting, the
battery may have to be replaced. Contact a
GT-R certified NISSAN dealer.

1.

Power steering fluid pump

2.

Alternator

3.

Crankshaft pulley

4.

Air conditioner compressor

5.

Drive belt auto-tensioner

WARNING

Be sure the ignition switch is in the OFF
or LOCK position before servicing drive
belts. The engine could rotate unex-
pectedly.

1. Visually inspect each belt for signs of

unusual wear, cuts, fraying or looseness. If
the belt is in poor condition or loose, have it

Maintenance and do-it-yourself

8-17

DRIVE BELTS

Advertising