NISSAN 2010 GT-R Sports Sedan - Manual (Page 263)

Black plate (266,1)
Model "R35-D" EDITED: 2009/ 3/ 11
REPLACING THE WIPER BLADES
Replace the wiper blades if they are worn.
1. Pull the wiper arm.
2. Push the release tab
*
A , and then move the
wiper blade down the wiper arm
*
1 while
pushing the release tab to remove.
3. Insert the new wiper blade onto the wiper
arm until a click sounds.
4. Rotate the wiper blade so the dimple is in
the groove.
NOTICE
. After wiper blade replacement, re-
turn the wiper arm to its original
position; otherwise it may be da-
maged when the hood is opened.
. Make sure the wiper blades contact
the glass; otherwise the arm may be
damaged from wind pressure.
Be careful not to clog the washer nozzle
*
A .
This may cause improper windshield washer
operation. If the nozzle is clogged, remove any
objects with a needle or small pin
*
B . Be
careful not to damage the nozzle.
8-20 Maintenance and do-it-yourself