5 setup > track – Navman 5505 User Manual

Page 48

Advertising
background image

TRACKER 5505/5505i/5605 Installation and Operation Manual

48

NAVMAN

14-5 Setup > Track

Press

one or more times until the

Setup

menu is displayed, then select

Track:

Tracking records and displays the boat’s course
on the chart (see section 3-5). Five different
tracks can be recorded: track 1 has up to 2000
points and tracks 2, 3, 4 and 5 have up to 500
points each.
Record

Off:

The TRACKER stops recording a track.

1

to

5

(select a track number): The TRACKER

starts recording the boat’s course into the
selected track.

Display

Off:

No track is shown on the chart.

1 to 5

(select a track number): The

selected track is shown on the chart.

Plotting Interval
The options are Distance or

Time.

Distance
Select the distance plotting interval: 0.01, 0.05,
0.1, 0.5, 1.0, 2.0, 5.0 or 10.0 distance units.
Time
Select the time plotting interval: 1, 5, 10 or 30
seconds or 1 minute.
Memory used
The percentage of memory used in the track
being recorded.

Tip: Use the user card display to check the

number of points recorded in each track (see
section 12).
Send track
This option is included for compatibility with
older units. For information, see your NAVMAN
dealer.
Delete track
The data in the track selected for Record (see
above) is deleted.

Max fuel flow
The maximum fuel flow from a fuel tank to be displayed on an analog fuel flow gauge (see section 8)
Max RPM
The maximum engine RPM to be displayed on an analog RPM gauge. Required only if Navman
diesel flow sensors are installed. Enter the maximum RPM you know you can achieve for the engine
rather than the maker’s value (see section 8)

Advertising