10 setup > time 14-11 setup > simulate, Caution, Caution danger warning – Navman 5505 User Manual

Page 51: Simulate, Mode, Local offset, Time format, Date format

Advertising
background image

TRACKER 5505/5505i/5605 Installation and Operation Manual

51

NAVMAN

Simulate mode is a way of becoming familiar
with the TRACKER (see section 2-7).
Press

once or more until the

Setup

menu is displayed, then select

Simulate:

Simulate

Turn simulate mode off

Turn simulate mode on

Mode

There are two choices for

Mode:

1 Normal
Simulates the boat moving from the selected
start point at the given speed and heading. The
options required for Normal are:

Speed: The simulated boat speed to use.

Course: The simulated bearing for the boat

to follow.

Press

once or more until the

Setup

menu is displayed, then select

Time:

Local offset

The difference between local time and UTC
(GMT). Change local offset when daylight
saving time starts and ends. The range is 0 to ±
13 hours, in 30 minute steps.

Time format

The options are 24 hour or 12 hour.

Date format

The options are dd/MMM/yy, MMM/dd/yy,
dd/MM/yy or MM/dd/yy.

14-10 Setup > Time

14-11 Setup > Simulate

CAUTION

!

!

CAUTION

DANGER

WARNING

Never have simulate mode on when the
TRACKER is navigating on the water.

Note: To select the start point, go to the chart
display before starting the simulation. Then:
• To start the simulation from the boat

position, press

to switch to centre on

boat mode.

• To start the simulation from a different

point, move the cursor to that point on the
chart.

Tip: To calculate a course, use the cursor

(see section 3-3).

Tip: As the boat moves, vary Course to

simulate the boat moving off course.
2 Demo
Simulates a boat moving along a route and
automatically displays different TRACKER
functions.

The options required for Demo are:

Speed: The simulated boat speed to use.

Route: The route to follow.

Advertising