Nikon D300s - Manual (Page 171)

145
r
4
Measure white balance.
Before the indicators stop flashing, frame the
reference object so that it fills the viewfinder and
press the shutter-release button all the way down. The camera
will measure a value for white balance and store it in preset
d-0. No photograph will be recorded; white balance can be
measured accurately even when the camera is not in focus.
5
Check the results.
If the camera was able to measure a
value for white balance,
C will flash
in the control panel for about six
seconds, while the viewfinder will show
a flashing
a.
If lighting is too dark or too bright, the
camera may be unable to measure
white balance. A flashing
b a will
appear in the control panel and
viewfinder for about six seconds. Press
the shutter-release button halfway to
return to Step 4 and measure white
balance again.
Control panel
Viewfinder
Control panel
Viewfinder