Nikon D300s - Manual (Page 382)

356
n
Remote
terminal
accessories
The D300S is equipped with a ten-
pin remote terminal for remote
control and automatic
photography. The terminal is
provided with a cap, which protects
the contacts when the terminal is
not in use. The following
accessories can be used (all lengths are approximate):
• Remote Cord MC-22: Remote shutter release with blue, yellow,
and black terminals for connection to a remote shutter-
triggering device, allowing control via sound or electronic
signals (length 1 m/3 ft. 3 in.).
• Remote Cord MC-30: Remote shutter release; can be used to
reduce camera shake (length 80 cm/2 ft. 7 in.).
• Remote Cord MC-36: Remote shutter release; can be used for
interval timer photography or to reduce camera shake or
keep the shutter open during a time exposure (length 85
cm/2 ft. 9 in.).
• Extension Cord MC-21: Can be connected to ML-3 or MC-series
20, 22, 23, 25, 30, or 36. Only one MC-21 can be used at a
time (length 3 m/9 ft. 10 in.).
• Connecting Cord MC-23: Connects two cameras for
simultaneous operation (length 40 cm/1 ft. 4 in.).
• Adapter Cord MC-25: Ten-pin to two-pin adapter cord for
connection to devices with two-pin terminals, including
the MW-2 radio control set, MT-2 intervalometer, and ML-2
modulite control set (length 20 cm/8 in.).
• GPS Unit GP-1 ( 0 198): Record latitude, longitude, altitude,
and UTC time with pictures.
• GPS Adapter Cord MC-35 ( 0 198): Connects GPS devices to
D300S via PC cable supplied by manufacturer of GPS
device, allowing GPS data to be recorded with
photographs (length 35 cm/1 ft. 2 in.).
• Modulite Remote Control Set ML-3: Allows infrared remote
control at ranges of up to 8 m (26 ft. 3 in.).