National Instruments USB device 628x - Manual (Page 20)

NI USB-622x/625x/628x OEM User Guide 20 ni.com
When you reconnect and power on the device, it appears as My Device in
the Found New Hardware Wizard and Windows Device Manager, as shown
in Figure 16.
Note When the device is initially installed, the Windows alert message may display the
following: Found New Hardware: M Series USB 62 xx (OEM) . This message appears
for a few seconds until the custom name appears and the Found New Hardware Wizard is
launched. This alert message device name cannot be changed.
Figure 16. “My Device” in the Found New Hardware Wizard and
Device Manager (Windows Vista/XP)
Note Modifying the INF file will not change the USB-622x/625x/628x OEM device name
in Measurement & Automation Explorer (MAX).